í Sensing : Average Sensing.
í Display : 3-5/6 digits 6000 counts LCD display
í Update Rate : Fast Data : 5 per second nominal
24 Segments Analog Bar-graph : 40/second
í Operating Temperature : 0°C to 40°C, at <70% R.H.
í Relative Humidity : Maximum relative humidity 80%
o
for temperature upto 31 C decreasing linearly to 50%
o
relative humidity at 40 C
í Storage Temperature: -20°C to 60°C, <80% R.H.
With battery removed from meter.
í Altitude : 2000m
í Pollution Degree : 2
í Temperature Coefficient : nominal 0.15 x
(specified accuracy) / °C @ (0°C~18°C or
28°C~40°C), or otherwise specified.
í Low battery : Below approx. 2.3V
í Power Consumption : 3.5mA
í APO Consumption : 10mA typical
í APO Timing : Idle for 34 minutes
í Power Supply : 1.5V AAA battery x 2
í Dimension : 161(L) X 80(W) X 50(H) mm
í Weight : Approx. 340 gm ( with Holster)
SAFETY :
˜ Safety : Certified per IEC/UL/EN61010-1 Ed. 3.1, IEC/UL/
EN61010-2-033 Ed. 2.0, IEC/UL/EN61010-031 Ed. 2.0
and the corresponding CAN/CSA-C22.2 regulations to
Measurement. Categories: CAT III 600V and CAT IV 300V AC & DC
˜ E. M. C. : Meets EN61326-1
In an RF field of 3V/m :
Capacitance function is not specified.
Other function ranges :
Total Accuracy = Specified Accuracy + 100 digits
Performance above 3V/m is not specified.
˜ Transient Protection : 6.5kV lightning surge (1.2/50ms)
˜ Terminals (to COM) Measurement Category :
V / mAmA / A : CAT III 600V and CAT IV 300 Volts AC & DC.
˜ Overload Protections :
μA & mA : 0.4A/1000V DC/AC rms, IR 30kA
@ 1000V DC/AC rms
A : 11A/1000V DC/AC rms, IR 20kA
@ 1000V DC/AC rms
V & AutoCheckTM : 660VDC / 1100VAC rms
mV, Ohm & others : 600V DC / VAC rms
ACCESSORIES :
Test leads pair, Carrying Case, Batteries installed, User’s Manual .
OPTIONAL ACCESSORIES : USB interface kit BRUA-20X.
Current Clamp CA300, Current Clamp Adaptor CA500, CA1000, CA2000, High Voltage Probe PD-28.